Showing posts with label Energy Efficient Windows. Show all posts
Showing posts with label Energy Efficient Windows. Show all posts

5.15.2013

It's Easy Being Green with Green Remodeling

by Jon Nunan
Posted on Home Advisor
 
Today, residential green remodeling is more popular than ever. While commercial and industrial building are also concerned with green remodeling, residential construction is truly beginning to embrace the eco-friendly and renewable resources that are making new homes more energy efficient inside and out. If you are in the market for a new kitchen, bathroom, or even a whole new house, there are many ways to make your project more efficient, less wasteful, more valuable, and even safer for you and your family!

Residential Green Remodeling: The Idea
While a big part of residential green remodeling is a matter of choosing efficient appliances and using recycled or renewable materials during construction, professional green builders know that there's much more to it. Instead of simply swapping older components with newer, greener ones, green builders try to focus on the house as a whole. Though each individual eco-friendly choice you make can up the efficiency of your project, the best residential green remodeling is an intricate combination of components and practices that work together for a single goal: a project that consumes less energy during every stage.

Energy Audits in Green Residential Remodeling
In most cases, the first step in green remodeling (residential or commercial) is performing an energy audit, where the area to be worked on is scrutinized up and down for any possible energy waste. For example, while an eco-friendly homeowner might replace an old refrigerator with a more efficient model, the energy auditor will observe the placement of the windows, the thickness of the insulation, the material of the walls and flooring, and the lighting scheme surrounding that refrigerator looking for any possible way to reduce possible energy waste.

Green Kitchen Remodeling: One Scenario
To really get a better idea of the lengths residential green remodeling will go to, here are a few changes that might be made to an average kitchen space:
*Use indigenous stone for counters to cut down on energy waste from transporting non-local stone
*Use flooring that comes from renewable sources like cork or bamboo
*Insulate wall cavities with recycled blown-in cellulose
*Use low-VOC paint and stain on cabinetry and other surfaces to increase indoor air quality
*Install an efficient induction range to reduce energy use and increase safety
*Opt for Energy Star rated windows and appliances
*Replace old bulbs with compact fluorescents
*Create space for multiple waste receptacles to make separating recyclables, organic waste suitable for compost, and trash easier
*Install instantaneous water heater to reduce energy spent keeping tank-stored water hot at all times

Green Remodeling Certification
To make the most of federal, state, or local incentives, green remodeling certification is often required. LEED Certification is a rating system created by the U.S. Green Building Council to help evaluate and recognize builders and projects that utilize green building practices and materials. LEED ratings grant points for projects that go green with sustainable sites, improved energy use and cleaner indoor atmospheres, the use of green materials and resources, and innovation and design processes that are congruent with green building. There are LEED accredited professionals and green builders out there, from architects to general contractors to interior designers, that specialize in green building and design. If you're interested in green remodeling certification for your project, contacting these professionals is the best place to start.
Of course, the financial incentives that come with green remodeling certification are a great benefit during your project, but the possibility of increasing resale value down the road should also be considered. As the average homebuyer becomes more concerned with energy efficiency and green building practices, the likelihood of getting a bigger return on a green investment increases. Who knows? That green certification may mean a difference of thousands if and when you house goes on the market!

Jon Nunan is a freelance writer who draws on his experience in construction, ranging from landscaping to log home building, for his articles on home improvement.
 

5 Green Home Improvements You Can Take to the Bank

by Matt Goering
Posted on Home Advisor

 Green Building

With talk of energy shortages, endangered species, and global warming dominating national headlines, it's easy to forget that going green with home remodeling is as good for your wallet as it is for the rainforest. Here's a list of 5 green remodeling projects that are good for the earth and save you cash at the same time.

#1—Install High Efficiency Replacement Windows
If you still think of a window as a single pane of glass that gives you a good view of the neighborhood, it's time to change your perspective. Modern energy efficient windows can reduce your home energy use by as much as 50% year round, and usually pay for themselves in just a few short years. If new windows are in your future, look for multiple paned windows, low e coatings, insulated frames, and gas fills. And don't forget that proper installation is just as important as buying quality windows when it comes to achieving high energy efficiency.

#2—Install a High Efficiency Heating System
Depending on the climate, heating your home can account for over 35% of your overall home energy costs. New, high efficiency furnaces and boilers can reduce those costs by as much as half, depending on where you live and how old your current heating system is. Look for units with AFUE ratings of 90 or better, and remember that poor installation can sabotage even the highest efficiency furnace.

#3—Install a High Efficiency Air Conditioner
According to the U.S. Department of Energy, air conditioning accounts for 5% of the total energy use in the U.S., and costs American homeowners $11 billion annually. That said, upgrading to a high efficiency air conditioner can make a big difference when it comes to reducing your monthly utility bills. Energy Star rated units are required to have SEER ratings of 13 or higher, though the highest efficiency models on the market currently have SEER ratings of 20 and higher. As a rule, the higher the SEER rating, the more money you'll save.

#4—New Kitchen Appliances
Kitchen appliances are a major consumer of energy in your home. Thanks to the federal government's Energy Star program, however, they're also one of the easiest ways to improve the overall energy efficiency of your home. An Energy Star dishwasher or refrigerator, for example, can reduce energy use at those appliances by 40% or more, while an Energy Star rated clothes washer can save you over $500 over the life of the appliance!
#5—Insulate, Insulate, Insulate
High efficiency furnaces, air conditioners, and windows are all excellent ways to cut energy costs and save you money, but even the best windows and heating and cooling systems won't do much if your home's insulation isn't up to speed. Leaky windows and doors, and poorly insulated attic spaces, are some of the most common culprits of energy inefficient homes, so those are good places to start. For a more comprehensive evaluation of insulation levels in your home, however, consider bringing in a professional energy auditor to help you identify where you can reap the biggest returns when it comes to upgrading the insulation in your home, and sealing up areas where leaks are costing you money!
Remember, going green is a win-win proposition. Not only does it mean you're doing everything you can to foster a better world for generations to come, but by making smart decisions on which projects you undertake, it can mean big monthly savings on your utility bills and a fuller bank account to boot.
Matt Goering, formerly a carpenter and house painter, is a freelance writer for the home improvement industry who has published over 600 articles.

5.06.2013

Window Types



As seen on Energy.Gov

What does this mean for me?

  • If you have old windows, they are likely losing large amounts of energy through the frames and glazing.
  • By upgrading old windows, you can reduce heating and cooling costs in your home.
Windows come in a number of different frame and glazing types. By combining an energy-efficient frame choice with a glazing type tailored to your climate and application, you can customize each of your home’s windows.

Types of Window Frames

Improving the thermal resistance of the frame can contribute to a window's overall energy efficiency, particularly its U-factor. There are advantages and disadvantages to all types of frame materials, but vinyl, wood, fiberglass, and some composite frame materials provide greater thermal resistance than metal.
Aluminum or Metal Frames
Although very strong, light, and almost maintenance free, metal or aluminum window frames conduct heat very rapidly, which makes metal a very poor insulating material. To reduce heat flow and the U-factor, metal frames should have a thermal break -- an insulating plastic strip placed between the inside and outside of the frame and sash.
Composite Frames
Composite window frames consist of composite wood products, such as particleboard and laminated strand lumber. These composites are very stable, they have the same or better structural and thermal properties as conventional wood, and they have better moisture and decay resistance.
Fiberglass Frames
Fiberglass window frames are dimensionally stable and have air cavities that can be filled with insulation, giving them superior thermal performance compared to wood or uninsulated vinyl.
Vinyl Frames
Vinyl window frames are usually made of polyvinyl chloride (PVC) with ultraviolet light (UV) stabilizers to keep sunlight from breaking down the material. Vinyl window frames do not require painting and have good moisture resistance. The hollow cavities of vinyl frames can be filled with insulation, which makes them thermally superior to standard vinyl and wood frames.
Wood Frames
Wood window frames insulate relatively well, but they also expand and contract in response to weather conditions. Wood frames also require regular maintenance, although aluminum or vinyl cladding reduces maintenance requirements.

Types of Window Glazing or Glass

In addition to choosing a frame type, you will need to consider what type of glazing or glass you should use to improve your home's energy efficiency. Based on various window design factors such as window orientation, climate, building design, etc., you may even want to choose different types of glazing for different windows throughout your home.
Gas Fills
To improve the thermal performance of windows with insulated glazing, some manufacturers fill the space between the panes with inert gas -- commonly argon or krypton -- that has a higher resistance to heat flow than air.
Heat-Absorbing Tints
Heat-absorbing window glazing contains special tints that change the color of the glass. Tinted glass absorbs a large fraction of the incoming solar radiation through a window, reducing the solar heat gain coefficient (SHGC), visible transmittance (VT), and glare.
Some heat, however, continues to pass through tinted windows by conduction and re-radiation, so the tint doesn't lower a window's U-factor. Inner layers of clear glass or spectrally selective coatings can be applied on insulated glazing to help reduce these types of heat transfer.
The most common gray- and bronze-tinted windows are not spectrally selective, and reduce the penetration of both light and heat. Blue- and green-tinted windows offer greater penetration of visible light and slightly reduced heat transfer compared with other colors of tinted glass. In hot climates, black-tinted glass should be avoided because it absorbs more light than heat. Tinted, heat-absorbing glass reflects only a small percentage of light, so it does not have the mirror-like appearance of reflective glass. Note that when windows transmit less than 70% of visible light, indoor plants can die or grow more slowly.
Insulated
Insulated window glazing refers to windows with two or more panes of glass. To insulate the window, the glass panes are spaced apart and hermetically sealed, leaving an insulating air space. Insulated window glazing primarily lowers the U-factor, but it also lowers the SHGC.
Low-Emissivity Coatings
Low-emissivity (low-e) coatings on glazing or glass control heat transfer through windows with insulated glazing. Windows manufactured with low-e coatings typically cost about 10% to 15% more than regular windows, but they reduce energy loss by as much as 30% to 50%.
A low-e coating is a microscopically thin, virtually invisible, metal or metallic oxide layer deposited directly on the surface of one or more of the panes of glass. The low-e coating lowers the U-factor of the window, and different types of low-e coatings have been designed to allow for high solar gain, moderate solar gain, or low solar gain. A low-e coating can also reduce a window's VT unless you use one that's spectrally selective.
Although low-e coatings are usually applied during manufacturing, some are available for do-it-yourselfers. These films are inexpensive compared to total window replacements, last 10 to 15 years without peeling, save energy, reduce fabric fading, and increase comfort.
Reflective Coatings
Reflective coatings on window glazing or glass reduce the transmission of solar radiation, blocking more light than heat. Therefore, they greatly reduce a window's VT and glare, but they also reduce a window's SHGC.  Reflective coatings usually consist of thin, metallic layers, and come in a variety of colors, including silver, gold, and bronze. Reflective window glazing is commonly used in hot climates to control solar heat gain. The reduced cooling energy demands can be offset by the need for additional electrical lighting, so reflective glass is used mostly for special applications.
Spectrally Selective Coatings
A special type of low-e coating is spectrally selective, filtering out 40% to 70% of the heat normally transmitted through insulated window glass or glazing while allowing the full amount of light transmission. Spectrally selective coatings are optically designed to reflect particular wavelengths, but remain transparent to others. Such coatings are commonly used to reflect the infrared (heat) portion of the solar spectrum while admitting more visible light. They help create a window with a low U-factor and SHGC but a high VT.
Spectrally selective coatings can be applied on various types of tinted glass to produce "customized" glazing systems capable of either increasing or decreasing solar gains according to the aesthetic and climatic effects desired. Computer simulations have shown that advanced window glazing with spectrally selective coatings can reduce the electric space cooling requirements of new homes in hot climates by more than 40%.

Learn More

External Resources 
References 
Climate-Specific Window Details BuildingScience.com

4.26.2013

Passive Houses Aggressively Reduce Energy

By Wendy Koch, USA TODAY
Updated 2011-02-23 8:26 AM
By H. Darr Beiser, USA TODAY
Heat your home by throwing a dinner party?
This concept may sound bizarre, but it's feasible in cutting-edge green homes that are so well-insulated, they don't need a furnace or boiler. They'll stay warm simply with body heat. A hairdryer might also suffice.
"It's like living in a glass thermos," says John Eckfeldt, a physician who built one of these "passive" homes in frigid Isabella, Minn. He says the inside temperature is so even that if he sees snow falling, he's surprised to realize it must be cold outside.
The windows never feel cold, nor do the concrete floors, even though they don't have in-floor heating, says Joe Turner of his "passive" home in Salt Lake City. "The house is also super quiet."
The passive house movement, popularized in Europe, where thousands of such homes have been built, is starting to catch on in the United States as consumers look to lower their utility bills. These homes don't require pricey solar panels or wind turbines but focus on old-fashioned building science to reduce energy use by up to 90% less energy.


Courtesy of Nancy Schultz


They're different from the "passive solar" homes of the 1970s, which used a lot of south-facing windows for heating, because they emphasize other features: thick walls and roofs (often at least a foot) and triple-paned windows, as well as efficient appliances and lighting. The secret is tightness, achieved via superior insulation and air sealing. A mechanical system brings in fresh air, heating or cooling it as needed.
Few U.S. homes, only a dozen so far, have obtained certification from the Passive House Institute US, a private Illinois-based group that bases its rules on the German Passivhaus standard.
Yet, dozens of homes nationwide are now being designed to meet its strict energy efficiency requirements.
"It's growing exponentially," says Tom DiGiovanni, who heads the Passive House Alliance, a group established last year to promote the standard. He says more than 400 people are now trained as passive house consultants, up from 20 two years ago.
"It feels like we're almost at a tipping point," he says, citing factors such as high energy prices and the Obama administration's push for energy efficiency. "It's like the perfect storm."
Proponents say the passive standard's prime tenets — insulation and air sealing — can also be used by owners of existing homes to boost energy efficiency.
"It holds great promise for this country," says Alex Wilson, executive editor of Environmental Building News. He says the needed materials, especially windows, are becoming more affordable, and building codes are demanding greater efficiency.
"It could be mainstream five years from now," says Nate Kredich of the private U.S. Green Building Council, which has its own green rating system. He says its popularity may depend on whether production builders jump on board and prices fall.
How much more?
Passive homes cost 6% to 12% more than other new homes, but they recoup that premium in lower utility bills in seven to 12 years, DiGiovanni says.
"The biggest extra cost is the windows," he says, noting that U.S. companies have only recently begun making triple-pane windows, so some builders had to import them. California-based Serious Materials makes ultra-efficient dual-pane windows that several U.S. passive homes have used.
Still, he says passive homes can be built on a budget, especially in multi-unit buildings. He says several affordable housing projects, including a 48-unit site in Urbana, Ill., are underway.
"It's innately reasonable," says architect David Peabody, who designed the first passive house in the Washington, D.C., area. He says the extra cost was about 8%, but the annual utility bills for the 4,200-square-foot home are projected at less than $750. U.S. households spent an average of $2,639 on energy costs for homes that size in 2005, the most recent year for which U.S. government data are available.
In Lafayette, La., architecture professor Corey Saft estimates his solar-equipped passive home cost about 10% more than a regular new home. He built it for $110 per square foot, which he says is inexpensive for a custom home. Census Bureau data indicate new homes in the South — many by production builders — sold for an average of $76.77 per square foot in 2009.
"It's the most cost-effective way of accomplishing the least energy use," says architect Dennis Wedlick, who designed New York state's first passive house. He says there was no premium for his Hudson Valley project, because he used Serious' U.S.-made windows and offset the cost of extra insulation by using a tiny, inexpensive ductless heating and air conditioning system.
Yet, Wedlick sees potential obstacles. "It could take a long time to get certified," he says, adding the program is being thoroughly developed but still lacks the staff to handle the booming demand.
Certification can cost several thousand dollars. The Institute charges about $1,000 to review an application for a 2,000-square-foot home, but that doesn't include the cost of hiring a consultant to advise on design and an independent auditor to verify the home's efficiency.
Looks count, too
Another challenge could be aesthetics. Most U.S. passive homes have limited windows and a boxy shape, which is the easiest geometry to keep insulated and highly energy efficient.
Homes with curves and larger footprints require extra insulation and sealing that add to the cost. Eckfeldt says his stylish passive home, with huge curved windows and upscale finishes, cost $450 per square foot.
Just how tough is the standard? John Semmelhack, a passive house consultant in Charlottesville, Va., reviewed one home designed to earn the top rating from the U.S. Green Building Council and determined it wouldn't qualify as a passive house for several reasons: It has too many windows; the windows don't absorb enough solar heat; and the L-shaped, courtyard house isn't a simple cube.
"The hardest type of house to meet the passive standard is a small detached single-family home," says Semmelhack, adding it's easier to meet it with larger commercial spaces, schools or — as is commonly the case in Germany — apartment buildings. He advised on how to get a school in Charlottesville certified; two other U.S. schools have already passed the test.
Climate could also be a challenge for the passive standard.
"It favors a (temperate) climate like Germany's," says Kevin Morrow of the National Association of Home Builders (NAHB). He says U.S. weather is much more diverse — some tropical, some Arctic and some a mixture of both.
Exacting requirements
Regardless of location, passive homes cannot have a heating or cooling load above 4,755 British thermal units per square foot, which is about one-tenth that of homes built to current U.S. codes. They must also be virtually airtight, which requires meticulous sealing of ducts, joints and hairline cracks.
"You can't greenwash this. You have to be a terrific builder to do this," Wedlick says.
To avoid overheating in warm areas, passive homes need exterior shading, ventilation and a cooling system, says German-born architect Katrin Klingenberg. She built her own home in Urbana to the Passivhaus standard in 2002 and opened the U.S. institute in 2008.
"It's basic building science, but it's taken to a high level," says Morrow, adding that NAHB may incorporate passive home rules into its own green building standard.
Kredich says the U.S. Green Building Council may do the same.
Unlike those programs, which also rate homes for water conservation, renewable building materials and other aspects of green building, the passive standard looks only at energy efficiency.
The U.S. Department of Energy did some of the original research on it decades ago, but with energy prices lower in the U.S. than Europe, the standard didn't take off until German physicist Wolfgang Feist founded the Passivhaus Institute in Darmstadt, Germany, in 1996.
One of the standard's benefits is that it makes it relatively easy for homes to become net zero energy, which means they produce as much power as they use, says David Johnston, author of Toward a Zero Energy Home. Because passive homes don't use much energy, he says, a small solar energy system will often be enough to meet their needs.
Saft made his passive home net-zero by adding a three-kilowatt solar array.
So did Eckfeldt and his wife, architect Nancy Schultz, who designed their Isabella home, using photovoltaics to offset their energy needs.
Yet, they can survive even the worst of winter without any help from the sun or backup heating. In December 2009, their house's boiler didn't work for 10 cloudy days when they were out of town and outside temperatures dipped well below zero.
How cold did it get inside? The thermostat held at 51 degrees.

Find Passive House certified windows and other eco-friendly products at World Class Supply

4.23.2013

Triple Threat Windows


residential architect magazine:


Excerpt from the:
Triple Threat
highly insulating windows are effective, but are they worth the price?
By:nigel f. maynard 

  
Traditionally, windows have been the weakest energy efficiency link in a building envelope, and early single-pane openings were the most egregious offenders. According to www.efficientwindows.org, single-glazed windows with clear glass allow “the highest transfer of energy (i.e., heat loss or heat gain depending on local climate conditions) while permitting the highest daylight transmission.” No wonder such windows are practically extinct in residential architecture.

The standard today is a double-glazed low-E window with insulation between the panes. A vast improvement over a single pane, insulated windows are better at preventing heat loss and heat gain, keeping the internal temperature of a house relatively stable. Depending on your region of the country, such a window—if it’s Energy Star rated—has a U-factor (the rate of heat transfer and an indication of how well the window insulates) of 0.30 to 0.60 and a solar heat gain coefficient (which indicates how well the window blocks heat caused by sunlight) of 0.27 to 0.40. Still, the best double-pane window is inadequate compared to the exterior wall.

In recent years, a new breed of windows—the so-called ultra high-efficiency products—has been gaining traction and things have gotten quite interesting. The windows are usually twice as efficient as double-pane units and some narrow the performance gap between the opening and the wall on which they’re installed.

Energy Star–rated windows typically hold an R-value of 3. By increasing the R-value from 3 to 5, average heat loss through the window is reduced by 30 percent to 40 percent. Designed for new construction and replacement projects, the windows can achieve a U-factor as low as 0.15.

R-5 windows are the lowest-performing product that Intus Windows offers. Managing director Aurimas Sabulis says the problem with most window companies is that their products aren’t versatile enough to be effective throughout the United States. Intus, he says, specializes in high-performance windows that cater to any region of the country. “One solution does not fit all,” he notes. “The U.S. has seven different climate zones.”

Intus, a Lithuania-based manufacturer that recently set up a U.S. division in Washington, D.C., offers all-wood and aluminum-clad wood windows with R-values up to about 10. The company also manufactures Passive House–certified products, which is why students from Parsons The New School for Design; the Milano School of International Affairs, Management and Urban Policy at The New School; and the Stevens Institute of Technology selected the windows for their Empowerhouse project, an entry in the 2011 Solar Decathlon.

“The Intus windows give us an overall annual energy gain,” says Laura Briggs, faculty lead and chairwoman of sustainable architecture at Parsons. “Our team carefully analyzed the size and placement of the windows in order to take full advantage of solar gain and daylighting to improve comfort and meet Passive House standards.” Briggs adds that the right sizing of the windows also was an economic choice. “The Intus windows are beautiful wood frames that are meticulously designed, specifically to reduce thermal bridging by having few conductive breaks in the frame,” she explains. “They prevent air infiltration due to the fully gasketed sashes and the triple panel gives us the U-values we wanted to attain.”

The DOE states that there is no specific definition for “highly insulating” windows, but the agency says the term usually refers to windows with a U-factor of around 0.2 or less for fixed units (venting units must meet 0.22). “Typically these are triple-pane windows with advanced features such as gas fills, suspended films, advanced spacers, and low-E coatings,” according to the DOE. “A U-factor measures a window’s insulating abilities; the lower the U-factor, the less heat loss through the window.” The windows’ good U-value ratings make them ideal for cold climates when you want better insulation and resistance to heat flow, but some architects also use the products in warm climates.

Architect Eric Lewis, AIA, LEED AP, used the windows on a Baltimore row house when he wanted to maintain views with large glass openings and high performance. “Because of the orientation of [the north side of the home], we used triple-insulated windows so we would still get our R-value and plenty of views and openness,” says Lewis, a senior associate at Alexander Design Studio in Ellicott City, Md.

 Intus Windows’ Sabulis says  “We have figured out how to do triple-pane windows for the lowest possible cost,” he says. Without giving away any secrets, Intus claims it offers products at 20 percent to 30 percent less than other manufacturers, which means a typical 4-foot-by-2-foot window will cost roughly $300 to $400.

The DOE launched the High Performance Windows Volume Purchase Program. “The goal of the program is to expand the market for highly insulating windows and low-E storm windows by reducing market barriers and offering windows products at attractive prices, thus making highly insulating windows more affordable,” the agency says.

intus passive window premmierp

World Class Supply carries Intus super performance windows, doors and curtain walls

4.17.2013


INTERVIEW: Building Science Pioneer Dr. Joe Lstiburek on the Good, Bad and Ugly Side of Buildings
Posted By Andrew Michler On March 11, 2013 @ 12:05 am In Architecture,Interviews,Sustainable Building 
Joe Lstiburek, Building Science, green building, Sustainable building, green building expert, green building expert, ASHRE, LEED, problems with LEED
The term ‘building science’ is used quite often now in sustainable building circles, but much of what we understand of it can be traced back to the work of Dr. Joe Lstiburek [4], founder ofBuilding Science Corporation [5]. He is anything but your typical engineer [6] or scientist who spends time crunching numbers or hiding away in a lab. Lstiburek has spent most of his career out in the field, testing and examining what works and what doesn’t. Many of the building standards today — from building codes to ASHRE to testing methodology — have his finger prints all over them, and his tough love criticism of building design is undercut with his wry humor and, of course, an encyclopedic knowledge of building construction. Read on to learn where buildings go wrong and what we can do about it.
Inhabitat: What does building science really mean? Did it not exist 50 years ago?
Joe Lstiburek: Well, it always existed. It’s really the technical side of architecture [7] that architects gave up. If architects did their job there wouldn’t be any need for building science. You know, I’m flabbergasted by the architectural profession giving up control of such a profitable part of the industry, which is the interaction of the building enclosure with the climate and the people and the mechanical system.
You know, this occurred because of the change in the focus on the education of the architects, the school. They’re focused – they’re trained in art. They’re not trained in physics and material science to actually execute their designs.
Back in the day, 100 years ago, or maybe 50 years ago in Europe, architects were trained like master builders. They understood structure. They understood mechanical. They understood physics. They understood material science. They understood how everything worked together. The focus now on the architectural education is all art and what’s missing are all of those other pieces — one of those missing pieces is building science or building physics.
Inhabitat: Do they feel like it’s not their problem? Such as how a building envelope will necessarily function in the real world — that if it’s down on paper and it’s been done before, then that’s okay?
Joe Lstiburek: I can’t speak for the architectural community, although I often try to – that is I think the arrogance of the profession drives me crazy. I think they feel it’s beneath their dignity to worry about these little, minor problems, like how to keep the rain out of the building, how to keep the air in and the air out. Let somebody else worry about that. I’m here to make an uplifting building to society to basically send a message about how this building is going to make this place a better place to live, and the people that live and work in it are better people. That’s what my mission is. This other stuff somebody else will worry about.
Inhabitat: So how do you get them excited about building science again?
Joe Lstiburek: Well, I don’t. What happens is the legal profession does that for us. The most effective technology transfer in the world is a lawsuit. They never call us when things are going well. They call us, “Oh, my God! We’re getting our ass sued because this problem occurred.” 
Inhabitat: One of my favorite things you  talk about is how highrises eighty years ago were more energy efficient than just about anything built today, especially with curtain walls and glass.
Joe Lstiburek: Well, it’s real easy. It’s just glass. I mean we have glass boxes and glass and steel are inefficient. Back in the day we had glazing ratios that were 10 and 15 percent and mass walls. An R2 curtain wall can’t compare to an R8 mass wall assembly. It’s not even close.

Inhabitat: So we talk about these advanced materials, advanced glazing options we have now and, you know, they go on and on and on. They are still nothing compared to a masonry wall as far as energy efficiency?
Joe Lstiburek: They’re nothing to the old approaches, but in the last 50 years the architectural profession has managed to piss away every energy advance that the rest of us have made because of all of the glass. I mean it’s just amazing to me.
And the hypocrisy is stunning. They blame everything. We’re here to save the planet. We’re here because it’s real important for our carbon footprint. And yet they turn out one glass box after another glass box after another glass box and they’re interested in what the emission rate of the paint is, and what the embodied energy of the carpet is, and the biggest problem is their original design. That just drives me crazy. LEED [8] is a colossal joke for that reason. They equate a bike rack with the same efficiency as the enclosure.
Inhabitat: Everybody who wants to point LEED’s weakness uses the bike rack argument.
Joe Lstiburek: Guess what? For good reason. And you know what? They’re idiots to do that and they refuse to limit glazing ratios and they don’t measure s***.
Inhabitat: And there’s no commissioning of the envelope.
Joe Lstiburek: No. It’s crazy, and you know what? We’ve been collecting the numbers and they’re pathetic. What’s great is that, okay, now they’re going to fix it, nothing like taking a really flawed and screwed up program and having to fix it.
Well, the lawsuit that Gifford started [9] gave them a wake-up call. The fact that people are now publishing the results and they’re pretty poor has given a wake-up call. At the end of the day, LEED is going to get fixed because they have no choice. It’s just that we’ve wasted a decade.
Inhabitat: It wasn’t just that lawsuit. You really started harping on how weak the LEED energy and atmosphere credits were in 2008.
Joe Lstiburek: I couldn’t understand why a licensed engineer or a licensed architect would have an outside bunch with a checklist supplement their professional knowledge and experience. I mean how insulting is that? Because that tells me that you are so poor as a professional that you believe that the judgment of a third-party checklist is more significant than your knowledge.
And experience as an architect or engineer. Are you kidding me? I mean I would have thrown them out of my office. I would have said, “What? Get the hell out of here.”
You go and you do this checklist thing and you’re telling me that I have to superimpose this arbitrarian, capricious checklist on my skill as an architect, as an engineer. I mean that, to me, is flabbergasting.
Inhabitat: So is it the same effect of when architects gave up the idea of building science and said somebody else can worry about it. The LEED checklist gave the architects the opportunity for somebody else to worry about what green building really is?
Joe Lstiburek: The architects have caused their own problem and only the architects can solve their own problem and I have faith that the architectural profession will fix itself. Architects need to get in charge of the process again, totally in charge of the process, and for that they need the education and the experience to do that.
There should be no reason that we have all of these outside consultants that are sucking bits of the architectural key out of the process. The architects should grab that for themselves and deliver the whole building the right way, to be the boss of the job, to be the master builders again. I mean my daughter is an architect and I keep telling them, “Your generation has to fix this. You guys need to be in charge again.”
Joe Lstiburek, Building Science, green building, Sustainable building, green building expert, green building expert, ASHRE, LEED, problems with LEED
Inhabitat: We talked about the curtain wall or glass being a key concern of energy efficiency in buildings. What else is a major issue right now?
Joe Lstiburek: In my view, over-ventilation.
Inhabitat: Is that ASHRAE’s fault or just people are doing above and beyond?
Joe Lstiburek: Well, ASHRAE is dominated by a vested interest in politics and LEED is even worse, if you can imagine that. I mean could you imagine getting a LEED point for increasing the ventilation 30 percent above ASHRAE and ASHRAE’s is already out of control.
The answer is source control, dilution is not the solution to indoor pollution and increasing ventilation rates is a horrible problem. The right way to do it is to not have the contaminant built into the building in the first place. And despite all of the people saying that there’s a clear link between certain levels of contaminants and medical effects, the epidemiology hasn’t been done.
People claim that it’s been done, but believe it or not, we don’t have the information in houses. We don’t know what the contaminants are. They have not been measured carefully and we’re making national policy decisions on ventilation going blind, with a bunch of people just getting together and offering an opinion. And the opinion is based on which political faction has managed to stack the ASHRE committee with their dominant voting block.
That’s not the way to do this. I mean you’d think with the amount of energy that buildings consume, and the amount of energy that residential buildings consume, that maybe somebody, like the federal government, would actually fund a study. You would need $20 million or $30 million and to go around and measure a whole slew of things in houses. That’s not been done, but yet, changing the ventilation rate by 15 or 20 percent is going to have more than that impact cost-wise on energy within the first year.
This kind of stuff drives me crazy. They manage to piss away money on stupid s*** and they can’t seem to fund something that’s important.
And the same thing in commercial buildings. You know, people are claiming that this level of formaldehyde [10] is dangerous and this level isn’t. What’s all of this based on? I mean most of the limits and for indoor air in buildings we’re simply taking occupational numbers and dividing by ten. Why not dividing by 12? Why not dividing by 15? In California, because California is crazy on every conceivable level, they divide by 100 [11]. So, in one state the occupational number because the indoor number by dividing by ten and California divided by 100. If people knew how arbitrary and capricious this was they’d go, “Well, you’re kidding me.”
Inhabitat: Is California basing their numbers on European models?
Joe Lstiburek: No. It wasn’t based on any models. What’s amazing is formaldehyde in houses doesn’t respond to ventilation rate changes. So if you’re ventilating at 0.1 versus 0.2 versus 0.3, the formaldehyde concentration remains constant. The reason is the more you ventilate the more it emits. You ventilate less it emits less. Don’t put it in the building, that’s a phenomenally successful way of dealing with the problem.
I’ll give you another example, which will never happen, but late at night I dream about it — have you’ve heard of the MSDS sheets?
Inhabitat: Sure.
Joe Lstiburek: They tell you absolutely nothing. What people think that the MSDS sheets tells us is what the manufacturer puts in their product. The answer is no. That would be useful if they told us everything that went into this product and the quantities, but that’s viewed as a trade secret.
What the MSDS sheet tells us is that if you put this into the product, you have to tell us that it’s in the product and this comes from a very short list of “this’es”. In other words, in order to get on that short list it takes a lot of effort. It really has to be miserable and beyond a shadow of a doubt, bad. So there’s a very short list of what you have to notify.
What that means is that people are idiots to take anything from that list, to put it in there. So they use a whole bunch of other things that nobody knows anything about or haven’t made it to the list, but they don’t have to tell you about it.  I always laugh –LEED and other people want you get to the MSDS sheet – and I’m saying “Why?”  What you need to do is you need to take one of the guys who makes this stuff out to dinner, get him drunk, and ask him: “What’s in there?”
Inhabitat: Another study funding opportunity for the U.S. government?
Joe Lstiburek: Well, not funding – basically, change the law. Make them tell us what’s in their products.
Inhabitat: So that regulation would make complete sense?
Joe Lstiburek: Phenomenal sense. Tell us what’s in it.
Inhabitat: Let’s get back to energy a little bit. Is thermal bridging the next cusp of people’s thinking about how building envelopes work?
Joe Lstiburek: Well, it’s no mystery to anybody who knows about buildings that it’s a big deal. I’m kind of amused that people are just figuring out well, glass is really bad and there’s too much it. Not having insulation continuously is a big deal.
What’s even more important is that air tightness is even more important. There’s no requirement for air tightness. How can you with a straight face talk about energy efficiency and not have a requirement for air tightness?
Inhabitat: How would you test for air tightness in a large building?
Joe Lstiburek: It’s easy. Every building has a mechanical system. You just simply open all of the interior doors and turn on the exhaust fan and measure the pressure difference, then close the exhaust fan and turn on the supply fan and measure the pressure difference. You got your entire building leakage.
You don’t even need to do it that way. Just simply take a compartment and measure the pressure in the compartment. You don’t have to measure the whole building, just measure pieces of the building. There are a lot of ways to do this.
I wrote about it in Understanding Air Barriers [12] on our web site and actually did my doctoral dissertation on how some of this can be done. It’s just that it takes about a half a day to set up the test and about 15 minutes to run the test. For people that claim that this is complicated and hard, it’s just not hard.
The problem is that because it is easy to do, and if you actually do it and you create a performance requirement, people will have to meet that requirement. That means they’re going to have to change what they do and that’s what the problem is; people don’t want to change what they do.
Inhabitat: You have been successful in taking complex building dynamics and making them relatively simple to understand. Do you think that building science is less complicated than a lot of folks out there are making it sound with a lot of hemming and hawing?
Joe Lstiburek: It’s a lot less complicated than people say and my only observation is there’s a lot of money to be made in keeping the peasants confused. I mean it’s so easy. What drives me crazy is WUFI models and computer simulations. None of that is necessary, and most of it is done wrong anyway.
I spend most of my time, and my firm spends a lot of time debunking other people’s reports, saying, “You can’t possibly be saying this based on what you did. The problem is the wall is leaking because you don’t have a flashing. Your hygrothermal model has nothing to do with why this wall is wet.”
Inhabitat: They couldn’t see the trees for the forest.
Joe Lstiburek: They couldn’t see the water through the trees.
Inhabitat: There you go. It sounds like, especially when we start talking about air barriers, you just do that right than you solve a lot of the other problems. You made a good living on buildings having lots of moisture issues.
Joe Lstiburek: It’s been a hell of a good life. I get to spend the entire winter in Aspen. Are you kidding me? The key to spending your entire winter in Aspen is to find a woman to love and marry, stay married to her, and get into fixing buildings. You need both.
Inhabitat: Good advice for the upcoming engineers who read this. So what’s the take away? Is it that air barriers are the biggest thing we need to focus on?
Joe Lstiburek: Well, no. Look, if I was in charge of teaching architects building science becomes very simple [13]. Building enclosure is an environmental separator. You want to keep the outside out and the inside in, except when you want to bring the outside in and when you want to have the inside out. That’s it and there are certain rules on how to do that.
I have this little list of rules and it all can be distilled into we need a water controlled barrier, an air controlled barrier, a vapor controlled barrier, and a thermal controlled barrier. Then we need a method of exchanging the inside with the outside based on when we want to. That’s it, there are sub-rules on how you do this, but that’s fundamentally it.
And I would have loved to written my own LEED standard. It would have been a paragraph long and it would start off by saying, “Don’t do stupid things,” and, “Do this,” and we’re done. “And measure everything,” because if you can’t measure it, I don’t believe it.
Inhabitat: Are we looking at a climate specific design?
Joe Lstiburek: Oh, I don’t believe that. The wall-roof foundation assembly that I laid out works everywhere.
If you are doing poor assemblies you have to be very careful climatically, but a good assembly works everywhere. The irony is that the crappy assemblies are very climatically sensitive. The good assemblies are climatically robust.
Inhabitat: So, does that mean state-of-the art is that we can find wall systems that can be translated to work in almost any situation.
Joe Lstiburek: I have a little bit of fun with this. I teach at the university now and I no longer fail stupid students because that would be discriminating against stupid students. I say, “Look, I have to pass you. You’re an idiot. I can’t fail you, but I’ll make a deal. Promise me this – that regardless of where you end up and how long you practice, you’re only going to use this wall design, and this roof design, and this foundation design, because they work everywhere.”
Inhabitat: And forever.
Joe Lstiburek: And forever. Quite frankly, that is true.
Inhabitat: So you feel confident that building science is at the point now that we can build a quality envelope that we’ll feel comfortable with 40 years from now. We go back, we tear that thing up, we’ll feel that everything’s done what it needs to?
Joe Lstiburek: Oh, we were able to do that 50, 60 years ago. The answer is yes, we’re able to do that now and we were able to do that before I was born. The irony is that even though that information has been known for so long, it’s not been used. And my observation on that is that people don’t use stuff until it becomes impossible for them to not use it. In other words, things become intolerably bad before there’s a change or an intervention. It’s only recently that things are becoming intolerably bad enough that we have to intervene and fix, even though we knew or some folks knew how to avoid the problems 50 or 60 years ago.
None of this is very complicated, none of this is a big mystery. What’s happening now is that we need to get this information into the people who need to make the decisions in an informed matter. In other words, people aren’t inherently bad. They just don’t have the information they need at the right time to make the right decision. So this is an information issue as opposed to a research issue. We don’t need to do anymore research. We need to do better transfer of what we know to the people who need to make the decisions at the right time.
Inhabitat: So where is that information now? What are the sources for working professionals to tap into this in a meaningful way?
Joe Lstiburek: Well, NIBS, National Institute for Building Science [14] has got a group called BETEC [15] and they’ve got some phenomenal design stuff online. I mean I hate to brag, but our website BuildingScience.com [16] is pretty darn good. And it’s for free –actually not, you’ve already paid for it. A lot of that work came out of government contracts that we were paid to do.
The National Research Council of Canada [17] and Canada Mortgage and Housing Corporation [18] have fabulous information online. The Department of Energy [19], USDoE, has got phenomenally good information online. And by and large, it’s fairly consistent. There aren’t big differences and wherever there is a big difference, just agree with me.
Inhabitat: Very good.
Joe Lstiburek: That was a bit of humor there, but you’re not laughing.
Inhabitat: I’ll write, “Ha-ha,” in there.
Joe Lstiburek: The big questions have been answered consistently well by all of these groups and there are issues in the margins, but they’re not big issues.
Inhabitat: When you go on the DoE web site there’s like 400 links or something like that to the energy software available, energy modeling software, for instance. Now, is any of this stuff really –
Joe Lstiburek: Useful? No. No. No.
Inhabitat: Everybody is wishing to have that magic bullet software?
Joe Lstiburek: Well, I view it as in love with Star Trek. I blame it all on Star Trek. Spock could go into that shuttle bay with his tricorder, do a tricorder scan and figure out that the tachyon field was interfering with the dilythiam crystals, causing him to off-gas, which is why Uhura has a headache. F**k that. We can’t measure s**t like that, but we believe that we can measure everything.
Watch NCIS and Abby Sciuto, that babe in the lab – you know, freaking does magical things and measures s**t and she does it all in 45 minutes, not counting commercials. It’s that we couldn’t do in 20 years even if we had unlimited money and people think that you can simulate and measure stuff. The world is not that clean and neat.
The best way we learn all of this is to build it and you see what happened. You say, “Ah, this worked. This didn’t,” and that’s the best education or information. That information lies in the experience base of the older engineers, architects and contractors.
One of the biggest problems we have is what I call our own institutional memory. We do a lousy job in construction, engineering and architecture, passing on the lessons of one generation to the next. So we are this huge, dysfunctional family. We need a Dr. Phil to get us all to talk to one another, or an Oprah, or somebody.
Inhabitat: It’s amazing how many times you refer to the fact that you would hypothesize something, come up with it and find it – it was in the books in the ‘50s and the ‘40s and the ‘60s.
Joe Lstiburek: It’s funny. I am one of the most frustrated, egotistical engineers on the planet. I thought I was a clever, smart guy who figured out stuff and it turns out that nothing I’ve ever thought I figured out did I actually figure out. It had been already done – better, earlier, more elegantly by not just one person, by lots of people. And we’re having all of these same discussions and arguments over and over and over again.
You know what? I feel like Bill Murray in Groundhog’s Day, except I don’t have an Andie MacDowell.

Locate Sustainable Building Materials at WorldClassSupply

4.04.2013

Lower My Electric Bills!


Replacing leaky, noisy windows with super-efficient Intus windows can dramatically reduce your electric bills, reduce exterior noise, unwanted solar heat gain and more.

Meanwhile, EarthDayCentral.com shares some additional ways to lower your electric bills, that will only take you seconds to do every day.

Unplug Unused Appliances

One surprising way you can cut your electric bills is to unplug any unused appliances. Believe it or not even when appliances are turned off, if they are still plugged in they still use electricity. Cell phone chargers are another way to unknowingly drain electricity. Next time remember to unplug things such as your hair straightener, game consoles, coffee pot, and printer when you are not using them. By taking the time to do these steps you will save up to $80 dollars a month on your electricity costs.

Lower Cooling Costs

Be sure to close your blinds on the sunny side of your home during the day. This will prevent the sun from heating up your room and forcing your air conditioner from running more than it needs to. By reducing the amount your air conditioner runs, you reduce your total electricity bills. You further reduce your electric bills by turning your air up a few degrees so that your air conditioner is not running constantly. You can also install and run ceiling fans to help air circulate and lower your cooling costs. A final tip to lower cooling costs is to turn the thermostat up during the evening and placing a fan in the rooms that will be slept in. This will prevent you from cooking the rooms that you are not using. Lowering your cooling costs will save you 10% each year.

Change from Incandescent to Fluorescent

Although this will cost you more in the beginning, changing from incandescent lighting to fluorescent lighting will save you money in the long run. Fluorescent lights last 10 times longer than incandescent lights. You ultimately save by reducing the number of bulbs you buy. This change could also save you as much as $30 dollars in energy costs.

Turn off Those Lights

Although it seems like an idea too simple to mention, it is surpring how many people keep unecessary lighs on around the house durung the day. It really is a simople task to switch off a light when you don’t need it. And while you are at it, unplus the TV or other electrical appliance when not in use. There is no point in keeping a light turned on that you are not using. By turning off unused lights you will save about $35 dollars a year in energy costs.

Maintain Your Refrigerator

You may have noticed that over time your refrigerator does not cool as efficiently as it once did. Instead of turning it up or running out and buying a new refrigerator, you should clean off the coils in the back and clean under the unit. This will clean up the dirt, dust, and pet hair that has collected behind and underneath your refrigerator. This can save you 30% on your cooling costs.

Use Natural Light

Use natural light during the day instead of electric lights. Open the blinds and shutters and allow some direct sunlight into your home or office. In a bedroom, you can increase the use of natural light buy placing a large mirror in a strategic location to spread the light. This is an obvious money saver because it lowers the amount of money you use lighting your home.

Use Timers

If you have a hard time remembering to turn things off you might want to consider putting timers around your home. This will help lower costs all around and you won’t have to worry about remembering to turn things off.